REMEHA GAS 360 S Instruction Manual download pdf (Page 16)

Remeha Gas 360 S 20/07/05 - 300005180-001-A

4 Setting the start up pressure

If necessary, the start-up pressure can be set on the right valve (1st

stage) using a flat screwdriver.

In the factory, it is set to maximum..

To modify this setting, it necessary first to remove the protection

using a screwdriver (1/4 turn).



The progressivity of the left valve (2nd stage) is always set to

"Minimum".



No setting is needed on the left valve on a 14-element boiler.

1/4 turn

Natural gas

Propane

Natural gas H Propane

Start-up pressure 11 mbar 10 mbar

Recommended position "Maxi"

between "Mini" and "Maxi" (1/4

turn)

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 35 36

No comments

REMEHA GAS 360 S Instruction Manual Page 16